Showing posts with label tips. Show all posts
Showing posts with label tips. Show all posts

Monday, February 17, 2014

The Drywall Tips to Properly Install Your Drywall

First of all, drywall is basically a popular term for prefabricated plaster wall panels. These panels are usually very easy to install but you need to remember that you have to do it properly in order for you to avoid encountering problems that can lead to costly and time consuming repair.

This is why you have to know how to avoid the common mistakes that is usually associated in installing drywalls. This will help in saving yourself the headache of redoing the entire job all over again, which can be very costly and can really lead you to have a very big headache.

So, here are some tips that will enable you to avoid the common mistakes in installing drywall and save a lot of time and money on repairs.

The first tip will concern the surface on which you will install the drywall on. The walls should be flat and the framing should be straight at right angles. You also have to remember that the studs or rafters that are bowed should be planed first in order to flatten them before you work on them.

To test if the wall is flat and straight, get a piece of string and stretch it across the walls in order to make sure that the studs are all on the same plane. If it is not, plane it again and check again.

When cutting the prefabricated plaster wall panels or drywalls, you will find that it is very simple to do as it doesn’t involve any sawing in order to separate it. You also don’t need to cut all the choice through the drywall. Doing so will only result to a prematurely-dull utility knife and a scratched surface underneath.

The proper choice to cut drywalls is by drawing a line across the panel. Make sure that the line you draw is completely straight. This can be achieved by using a drywall T-square. Then, you have to score down this line just deep enough to cut through the backing paper. After doing this, all you need to do is lift the panel and snap it right down the line or the guide. To complete the cut, you can then slice through the remaining layer of backing paper and you have to smoothen any rough edges.

You also have to keep in mind that it is very common for people to go overboard when they apply the joint compound or the mud when it comes to taping or mudding the drywall. Alchoices keep in mind that you should never work the joint too much and at a very early stage.

A great choice to do this is by first applying the tape and spread a thin layer of compound over the tape to embed it. Then, you have to leave it to dry before you scrape it slightly to level any high spots. You can apply a second layer if it is necessary or if the first layer isn’t enough.

These are the proper choices on how you can properly install drywalls on your home. By following these tips, you can be sure that you will be able to avoid costly mistakes in drywall repair.
ReadMore...

Sunday, February 16, 2014

Tips On Stenciling

Stenciling is a very arduous task. It requires a lot of hard work and determination. It also requires concentration and focus. Unlike other art forms, stenciling is a very personal art form where in an individual get to choose his or her design and make her own design too. It is a hobby that can help in the bonding of families and friends.

Stenciling started with the stenciled patterns in caves. It proliferated with the advancements and initiatives of Japanese and Chinese. Other cultures like the Europeans and Romans helped in the spreading of the art form.

There are many types of stenciling. These types include wall stenciling, graffiti stenciling and furniture stenciling. Stenciling is used in decorating and expressing yourself. An individual must have a broad knowledge about stenciling before doing a project. Here are some tips that can help in ensuring a quality project.

1.) Use a proficient tool – choose your equipment carefully. Brushes for stenciling have short and firm bristles. They are also round. These characteristics of the brushes will prevent paint from seeping into the edges of the stencil. Other equipment recommended are sponge and small roller.

2.) Start working from the outside towards the middle. This method will stop
the paint from seeping under the edges.

3.) Dont put too much paint in the brush. This will create a messy output. Dip the brush into the paint lightly. Dab the brush with a piece of paper or cloth if there is an excess of paint.

4.) Apply coats individually. Dry the first coating first before applying the second one. Apply paints thinly. It is better to have a first and second coating than a thick one.

5.) Tape the stencil to avoid it from slipping down or to avoid spaces between the stencil and the surface. Tapes with low tacks are the best materials to use for this procedure.

6.) Use colors to make your stencil design beautiful. Cover the areas with tape when you dont want them to be included in a particular color that you are applying.

7.) Practice everyday. Practice applying the paint and using your brush. Study your design carefully and practice it in other surfaces.

8.) X-rated stencils. These x-rays are the best for stencil cutting. Treasure them.

9.) Clean regularly. Clean the surfaces where you will work. Clean the brushes that you will use. Cut your stencil cleanly. Keep your stencil free from any paint. Paint in the edges will damage the outcome of your design. Clean your brushes in between applying of different coating. After cleaning your brushes and stencil, let them dry before using them again.

10.) Keep the stencils flat. Put it between two pieces of cardboard, book or anything that will hold the design flat.

These are some of the things that one must remember before doing a stencil project. There are still other things to do but these ten tips are the most fundamental and basic things to do. There are also some traits that one must possess before he will be ready to do a project.

Stenciling is a great art. It gives the artist a lot of choice when it comes to design, equipment and materials. Yet, it is only great if you perfect the art and spend time learning about it.
ReadMore...